Honeywell ULTAMAX PRO FC20 User Manual page 11

GETTING STARTED (CONTINUED)
7
To remove the clean water tank, support the machine with one hand, hold the
clean water tank handle with the other hand and turn it counter-clockwise in the
unlock position. Lift up the clean water tank.
To install the clean water tank, place it back in the unlock position and twist
clockwise to locked position. (Fig.7)
Roller Brush Removal and Installation
1. Remove the cover plate by gently pulling up the brushroll cover lock.
2. Remove the roller brush lock toward the middle and pull out the roller brush.
To reinstall, insert the left side of the roller brush into the slide until you hear a
click. Reinstall the cover plate by placing it on top of the roller brush and press
firmly until you hear a click. (Fig.8)
8
Clean
water tank
Brushroll
cover
lock
Slide
click
sound
Brushroll
lock
EN | 11