Advertisement
Available languages
Available languages
OPERATION (CONTINUED)
4. When the machine is power on, put it upright and the brush motor stops working
immediately, while suction motor works at higher power for 3 more seconds
before it stops.
10
12
Auto mode
Note:
1. The water spray button cannot be used together with the On/Off button or the
mode button simultaneously.
2. It is recommended to use the Max mode to work in heavily polluted environments
or when there are many water spots. (Fig.12)
3. When the dirty water tank is full, the full water indicator of Dirty water tank on the
display screen will flash to give an alarm prompt, and the machine motor will stop
working immediately.
4. After using the machine, always put it back on the charge base to prevent the
product from falling over.
5. When clean water tank is in shortage of water, the display screen shows "
remind user to fill in clean water tank.
6. No matter whether it is powered on or not, please do not wash the floor brush
assembly with water to prevent water from entering the motor, water pump, circuit
board and other electrical components in the floor brush, otherwise it may result in
damage.
7. Do not use the product to suck foaming liquid, nor put high-foaming cleaning
solution into clean water for use.
On/Off button
Mode button
Max mode
11
Water
spray
button
EN | 14
Mute button
" to
Advertisement
