Makita DUH606 Instruction Manual page 9

Installing or removing the shear
blades
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
You can install 500 mm or 600 mm shear blades to your
tool.
1. Attach the blade cover to the shear blades.
1
Fig.5
► 1 . Blade cover
2. Place the tool upside down, then remove 6 bolts,
and then remove the cover and the plate.
1
2
3
Fig.6
► 1 . Bolt 2. Cover 3. Plate
NOTE: The plate may remain on the cover.
3. Turn the crank with the slotted screwdriver so that
2 holes are perpendicular to the shear blades.
1
Fig.7
► 1 . Crank 2. Hole
4. Remove 2 bolts, the felt pad and the sleeves, and
then remove the shear blades.
1
Fig.8
► 1 . Felt pad 2. Bolt 3. Sleeve 4. Shear blades
9 ENGLISH
2
2
3
4