Microphone Not Picking Up Sound; Headset Not Charging - Cisco 7800 Series Accessories Manual

Headsets
Solution
Use the following work flow to troubleshoot your problem.
Figure 15: Poor Audio

Microphone Not Picking up Sound

Problem
You cannot be heard when using your headset.
Solutions
• Check to make sure your microphone is not muted. Press the mute button on your headset to mute and
• Make sure that the microphone boom has been lowered. For optimal sound, keep the headset microphone
• Make sure that your headset is properly plugged into your device.
• For the Cisco Headset 560 Series, check that you are not taking your headset too far from the headset

Headset Not Charging

Problem
Your Cisco Headset 561 and 562 is not charging when placed on the base.
Solution
• Check that your base is plugged into a reliable power source.
• Make sure that your headset is properly seated on the base. When the headset is properly seated, the LED
unmute your microphone.
no further than 1 in or 2.5 cm from your face.
base. The headset has an effective range of approximately 100 feet or 30 meters.
shows solid white. When charging, the LEDs on the base light up in sequence from left to right. When
the headset is fully charged, all five battery indicator LEDs show solid white.
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
Microphone Not Picking up Sound
47