Cisco 7800 Series Accessories Manual page 66

Hide thumbs Also See for 7800 Series:

Table of Contents

Connect a Key Expansion Module to a Cisco IP Phone

Step 5

Position the phone so that the front of the phone faces up.

Step 6

Connect one end of the key expansion module spine connector to the accessory connector on the Cisco IP

Phone.

a) Align the spine connector with the accessory connector ports.

Note

b) Firmly press the spine connector into the phone.

This diagram shows the spine connector.

This diagram shows the installation of the spine connector.

Step 7

Connect the other end of the spine connector to the key expansion module as shown in this diagram.

a) Align the spine connector with the key expansion module accessory connector ports.

b) Firmly press the key expansion module into the spine connector.

Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager

Install the connector in the orientation shown in the following diagrams.

Key Expansion Modules

Table of Contents

8800 series