Makita CW004G Instruction Manual page 14

NOTE: When both of the AC adapter and the battery
cartridge are installed, the appliance operates by the
power from AC adapter.
NOTE: The battery power is consumed slightly even
the appliance operates by the power from AC adapter.
NOTE: The appliance does not charge the battery
cartridge.
NOTE: When the appliance shifts power supply, the
compressor will stop for about 3 minutes to protect
itself.
Putting food or drink in the
appliance
CAUTION:
Cool the chamber sufficiently
before putting the ice cream or frozen food in the
chamber. Do not put the ice cream or frozen food
with other food and drink. Otherwise the ice cream
and frozen food may melt.
CAUTION:
Do not put things that are easily
perishable in the chamber when the appliance in
heating mode. The food or drink may rot.
CAUTION:
Do not put the food (especially raw
food) while the appliance is turned off. The food or
drink may rot.
CAUTION:
Do not put foods in the chamber
directly. Wrap the food or put the food into the
plastic bag.
CAUTION:
When operating in heating mode,
do not put plastic bottles without heat resistant.
Otherwise they may deform or break.
Opening or closing the door
Pull up the latch to release and open the door. The door
can be opened from either side.
► Fig.6
Pull up the both latches to release and remove the door
from the body.
► Fig.7
CAUTION:
Make sure that the door is closed
with the latches. Otherwise the door may open
suddenly and injury result.
CAUTION:
Do not force the door to open
with the latch locked. Otherwise breakage or injury
result.
NOTICE:
Close the door promptly. Opening the
door for a long period can cause significant increase/
decrease of the temperature in the chamber.
NOTE: When closing the door, be sure to lock the
latches manually. The latch does not lock automat-
ically. If the latch protrudes from the top face of the
door, the latch is not locked.
Separator
By using the separator, the appliance operates in dual
chamber mode.
In the dual chamber mode, you can set the different
temperature for each chamber. Refer to the section for
selecting the control temperature.
To install the separator, align the grooves in the separa-
tor with the rails on the chamber and slide it into place.
► Fig.8
When operating in single chamber mode, remove or
store the separator as illustrated so that the appliance
does not detect the sensors in the separator. The sen-
sors are positioned in the bottom end of the separator
and in the bottom of the chamber.
► Fig.9
NOTICE:
Always confirm the control tempera-
ture after installing or removing the separator.
The control temperature changes automatically when
installing or removing the separator. Unexpected con-
trol temperature may cause food and drink rotted.
Operating the appliance
Turning on the appliance
Press the power button
Press the power button
appliance.
Selecting the control temperature
Press the temperature setting button
select the control temperature. Refer the chap-
ter "SPECIFICATIONS" for the selectable control
temperature.
The appliance starts cooling/heating about 5 seconds
after without any operation, then the control tempera-
ture stop flashing and the temperature display shows
the current temperature.
14 ENGLISH
to turn on the appliance.
again to turn off the
/ to