Table of Contents
Advertisement
MAN0530 Issue 15 - 07/17
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
•
set the system path length
•
perform a system self test
•
check system alignment
•
initialise the system and make it live
Note: The 4-20 output is inhibited during this procedure. See the earlier description.
System Type
The initial display after Install is chosen is in the following format:
tttttttt
where:
Note: It is not possible to change the system type. This is set during calibration and configuration
of the unit at the factory.
Path Length
The following message is displayed:
nnnn
where:
The following ranges of path length can be entered for the system types:
System Type
Short Range
Medium Range
Long Range
System type. The system type displayed is one of the following:
Display Text
Short Range
Medium Range
Long Range
The path length in metres.
Minimum Range (m)
5
20
120
System Type
tttttttt
System Type
40m range system
120m range system
200m range system
Path Length
nnnn
Maximum Range (m)
40
120
200
93
Searchline Excel
Step Size (m)
1
1
1
Advertisement
Table of Contents
