Honeywell 04230-A-1001 Technical Handbook page 100

MAN0530 Issue 15 - 07/17
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
Reset Occurred
Time Adjusted
Uncalibrated
Volt Ref Fault
Self Test
This option lets you start a system diagnostic self test.
The following message is displayed during the self test process:
The following message is displayed for three seconds at the end of a successful self test
process.
Soft Reset
This option lets you reset the system.
This message is displayed during the reset process:
The following message is displayed for three seconds when the process is completed:
A.5.5 Config Menu
This sub menu lets you check the configuration parameters of the unit and update the user
configuration parameters. It has the following options:
Show Gas
Show Config
Show Install
ERR_EXCEL_RESET
ERR_EXCEL_LOG_TIME_ADJUST
ERR_EXCEL_UNCALIBRATED
ERR_EXCEL_VOLTAGE_REF_FAIL
Processing Data
Please Wait
Checks Passed
Processing Data
Please Wait
Show the gas related configuration parameters.
Show the user related configuration parameters.
Show the installation related configuration parameters.
A gas detector reset has occurred.
The Excel log time has been changed.
The gas detector requires calibration.
Voltage reference fault
Unit Reset
100
Searchline Excel
detected.