Table of Contents
Advertisement
Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM4
Speaking with someone while wearing the headset (Speak-to-Chat)
If Speak-to-Chat is enabled beforehand, the Speak-to-Chat mode starts automatically when you talk to someone. The
headset pauses or mutes the music which is being played and captures the voice of the person you are conversing with
on the microphone to make it easier to hear.
To enable Speak-to-Chat
To activate the Speak-to-Chat mode, the headset's automatic audio detection must be enabled in advance.
In the factory setting, Speak-to-Chat is disabled. To enable it, hold 2 fingers to the touch sensor control panel until you
hear the voice guidance say, "Speak-to-chat activated".
To disable Speak-to-Chat
Hold 2 fingers to the touch sensor control panel once again until you hear the voice guidance say, "Speak-to-chat
deactivated".
About the instruction manual video
Watch the video to find out how to use Speak-to-Chat.
https://rd1.sony.net/help/mdr/mov0015/h_zz/
Hint
If Speak-to-Chat does not switch to enable/disable properly, operate as described below.
Slightly separate both fingers
92
Advertisement
Table of Contents
