Table of Contents
Advertisement
Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM4
The touch sensor control panel does not respond correctly
The sensor of the touch sensor control panel is built into the flat surface of the right unit. Operate within the range of
the sensor.
When you swipe your finger forward/backward or up/down on the touch sensor control panel, the touch sensor
control panel may not work correctly depending on the angle at which the headset is worn or the direction your head
is facing.
When you swipe your finger forward/backward, make the movements perpendicular to the headband.
When you swipe your finger up/down, make the movements parallel to the headband.
Note
You can use Quick Attention Mode and Speak-to-Chat while connected to a device via the supplied headphone cable and with
the headset turned on, but you cannot perform operations such as volume adjustment or play/pause.
The headset will not operate correctly when you operate the headset with your fingernail or a gloved hand. Remove your glove,
and operate the headset with the ball of your finger.
The operation of the touch sensor control panel is not available when the headset is not worn on your ears.
Check that the touch sensor control panel setting is enabled with the "Sony | Headphones Connect" app.
When Speak-to-Chat is enabled, music playback is automatically paused in response to the voice of the person wearing the
headset, and the headset changes to the Ambient Sound Mode, but this is not a malfunction.
147
Advertisement
Table of Contents
