Table of Contents
Advertisement
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
2
Register the headset using the computer.
3
Select [
(System Preferences)] - [Bluetooth] from the task bar in the lower right part of the screen.
1.
Select [WH-1000XM4] of the [Bluetooth] screen and click [Connect].
2.
If [WH-1000XM4] and [LE_WH-1000XM4] are displayed, select [WH-1000XM4].
[LE_WH-1000XM4] will be displayed first, but wait until [WH-1000XM4] is displayed.
It may take about 30 seconds to 1 minute for [WH-1000XM4] to be displayed.
If [WH-1000XM4] is not displayed, try again from step
If Passkey (*) input is required, input "0000".
The headset and computer are paired and connected with each other. You will hear the voice guidance say,
"Bluetooth connected".
If they are not connected, see
*
A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
Click the speaker icon in the upper right part of the screen and select [WH-1000XM4].
4
Now you are ready to enjoy music playback on your computer.
"Connecting to a paired computer
52
.
(Mac)".
Advertisement
Table of Contents
