Troubleshooting Boot Screen Error Messages; Booting Error Messages - Cisco D9477-1 Installation And Operation Manual

Troubleshooting Boot Screen Error Messages

This section contains examples of warning screens associated with booting error
conditions. Some booting error conditions may require you to contact Cisco Services.

Booting Error Messages

The following table lists booting error conditions sorted alphabetically by error type,
and provides suggestions for correcting the error condition.
Error Condition
Application Code
Download Failure
Screens
78-717866-01 Rev D
LCD Messages
Bad TFTP Checksum

The following message appears if the MQAM is
unable to download application code execution
files from the TFTP server due to a bad
checksum.
Bad TFTP App Checksum
Restarting...
The MQAM automatically reboots.
Unable to TFTP App Code (Boot Mode=2)

The following message appears if the MQAM is
unable to download application code execution
files from the TFTP server during boot mode 2.
Unable to TFTP App Code
Restarting...
The MQAM automatically reboots.
Unable to TFTP App Code (Boot Mode=1)
The following message appears if the MQAM is
unable to download the application code
execution files from the TFTP server during boot
mode 1.
Unable to TFTP App Code
Continuing Startup...
The MQAM then starts the application program.
Troubleshooting Boot Screen Error Messages
Check and Correct




A corrupted
application file may
cause this condition.
Reinstall the MQAM
package on the DNCS
if all MQAMs have
this error condition.
Check IP connectivity.
Contact Cisco Services.
Note: Refer to
Understand the Boot
Process (on page 42)
for detailed
descriptions of the
boot process.
79