Table of Contents
Advertisement
Chapter 3 Provision the MQAM
Provisioning the MQAM on the DNCS
Follow these steps to provision a new MQAM or adjust the settings for an existing
MQAM from the DNCS.
Note: Provision the MQAM in accordance with your network wiring diagram and
the input/output specifications for both the MQAM and other network devices.
1
From the DNCS Administrative Console, select one of the following tabs:
For SR 2.7/3.7/4.2 and later, click the Network Element Provisioning tab.
For SR 2.5/3.5/4.0 and earlier, click the Element Provisioning tab.
2
Click QAM. The QAM List window appears.
3
Choose one of the following options:
To provision a new MQAM, select File> New > MQAM. The Set Up MQAM
window opens.
To change the settings for an existing MQAM, highlight an MQAM in the list,
select File > Open. The Set Up MQAM window opens.
Enter or change the information on the Basic Parameters tab. Refer to the field
4
descriptions in Basic Parameters Tab (on page 31) for more details.
5
Click the Advanced Parameters tab.
6
Enter or change the desired information on the Advanced Parameters tab. Refer
to the field descriptions in Advanced Parameters Tab (on page 33) for more
details.
7
To define the QAM Configuration File Name, click Select. The File Selection
Dialog window appears.
8
Enter the configuration file in the Selection field; then, click OK. The File
Selection Dialog window closes. Refer to File Selection Dialog Window (on page
34) for more information.
9
Choose one of the following options:
To provision the connectivity settings for a new MQAM, go to step 10.
To adjust the settings for an existing MQAM, go to step 11.
10 On the Set Up MQAM window, click Apply.
Results:
Settings for the new MQAM are saved.
The Connectivity tab becomes active.
Note: When you first provision the MQAM, the Connectivity only appears after
you click Apply or Save from the Set Up MQAM window. Thereafter, the
Connectivity tab is accessible for viewing or modification.
38
78-717866-01 Rev D
Advertisement
Table of Contents
Troubleshooting
