Cisco D9477-1 Installation And Operation Manual page 53

The following table lists field descriptions on the Connectivity tab.
Field
QAM Name
Headend Name
Device Type
Device Name
Card Type
Slot Number
Port Number
Show TS IDs
Show (slot, port)
Legend
78-717866-01 Rev D
Description
Identifies the name of the selected MQAM (also identified
on the DNCS as a QAM or Service QAM). Allows you to
specify the Input 1 Port or Input 2 Port.
Identifies the headend in which the input device exists.
Identifies the type of input device, such as a VOD Server,
SONET to ASI converter, or BIG to which the MQAM is
connected.
Identifies the name of the input device to which the
MQAM is connected.
Identifies the type of card connected to the MQAM. Only
displayed when a BIG is connected to the MQAM.
Identifies the slot number of the card connected to the
MQAM. Only displayed when a BIG is connected to the
MQAM.
Identifies the port number on the card that is connected to
the MQAM. Only displayed when a BIG is connected to
the MQAM. The server should be entered in the DNCS as
a generic MPEG source. Create as many ports as are
available for the server and connect to the MQAM.
Selecting this option displays the Transport Stream (TS)
IDs.
Selecting this option displays the slot and port of the card
connected to the MQAM.
Displays a group of icons that represent network elements
that may be displayed in the graphical drawing area.
Connectivity Tab
37