Cisco D9477-1 Installation And Operation Manual page 55

11 Click the Connectivity tab.
12 Select the MQAM input port you want to connect to the network.
13 Select the device you want to connect to the MQAM in the Connect To fields of
the Connectivity tab; then, click Save. The QAM List is updated to include the
MQAM.
Notes:

The fields available in the Connect To panel of the Connectivity tab vary
according to which device is selected.

Refer to Connectivity Tab (on page 36) for descriptions of each field.
78-717866-01 Rev D
Provisioning the MQAM on the DNCS
39