Setting Up Wpa-Psk Security - NETGEAR WG511T User Manual

NETGEAR 108 Mbps Wireless PC Card WG511T User Manual

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.
1. Run the WG511T Smart Wizard.
a. Make sure the WG511T software is installed and the WG511T is fully inserted in an
available CardBus slot in your laptop computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-12
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA-PSK [TKIP].
For more information on WPA security, see the Web link to
on page B-1.
3. Save your settings in a Profile.
2-16
matches exactly what is configured in the access point.
v3.0, January 2007
"Wireless Communications"
Network Connections and Wireless Security