Table of Contents
Advertisement
User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511 v2
Note: Larger encryption keys require more processing and may slow the communications
response times.
4. Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the wireless
devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b wireless devices.
5. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the configuration utility.
How to Configure WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the WG511 v2 Smart Wizard Wireless Assistant.
a. Make sure the WG511 v2 software is installed and the WG511 v2 is fully inserted in an
available CardBus slot in your laptop computer.
b. Click the WG511 v2 icon
Figure 3-6: Settings tab page
3-12
June 2005
in the Windows system tray to open the Smart Wizard.
Configuring Wireless Adapter Settings
Advertisement
Table of Contents
