Installation - NETGEAR WG511T User Manual

• Network Mode (Infrastructure or Ad-hoc): Infrastructure
• Data security WEP or WPA-PSK encryption: Disabled

Installation

The instructions in this chapter explain how to install the WG511T to connect to a network with an
access point or router. Wireless security, advanced settings, and Computer-to-Computer (Ad Hoc)
instructions are covered in
To install the WG511T Wireless PC Card:
1. First, install the WG511T software.
Insert the NETGEAR CD. If the CD main page does not appear, double click Autorun.exe on
the CD.
a. Click Install the Software. The Check for Updates window opens.
Figure 1-1
b. If you are connected to the Internet, click Check for Updates. If not, you can choose to
install from the CD.
c. When the Installation Complete message appears, click Next.
2. Now, insert the wireless PC card.
Basic Setup
NETGEAR 108 Mbps Wireless PC Card WG511T User Manual
Chapter 2, "Network Connections and Wireless
v3.0, January 2007
Security".
1-3