What Is In The Box; Wg511T Default Wireless Settings - NETGEAR WG511T User Manual

NETGEAR 108 Mbps Wireless PC Card WG511T User Manual
• Large metal surfaces
• Microwaves
• 2.4 GHz Cordless phones
In general, wireless devices can communicate through walls. However, if the walls are constructed
with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are
between the devices. For more information, see the link to
Appendix B.

What Is in the Box

The product package should contain the following items:
• NETGEAR 108 Mbps Wireless PC Card WG511T
• Installation Guide for the NETGEAR 108 Mbps Wireless PC Card WG511T
• NETGEAR CD, including:
– Driver and Smart Wizard Software
– NETGEAR 108 Mbps Wireless PC Card WG511T User Manual
• Warranty card
• Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.

WG511T Default Wireless Settings

If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless network and wireless security settings that are already defined.
Your NETGEAR 108 Mbps Wireless PC Card WG511T factory default basic settings are:
• Network Name Service Set Identification (SSID): Any (First available network)
Note: In order for the WG511T Wireless PC Card to communicate with a wireless
access point or wireless adapter, all devices must be set up to use the same
wireless network name (SSID).
1-2
"Wireless Communications" in
v3.0, January 2007
Basic Setup