NETGEAR WG511T User Manual page 35

b. Use the
Figure 2-11
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA2-PSK [AES].
For more information about WPA2-PSK security, see the Web link to
Communications" on page
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
Network Connections and Wireless Security
NETGEAR 108 Mbps Wireless PC Card WG511T User Manual
icon to open the Smart Wizard. The Settings tab page opens.
matches exactly what is configured in the access point.
B-1.
v3.0, January 2007
"Wireless
2-15