Care & Cleaning - Breville the Smart Scoop BCI600 Instruction Book

Ice cream machine
Hide thumbs Also See for the Smart Scoop BCI600:
Table of Contents

Advertisement

Care & Cleaning
Ensure that the ice cream machine is
turned off by pressing the POWER button.
The ice cream machine is off when the
START | PAUSE button's LED light is
no longer illuminating red. Remove the
power plug from the power outlet. Allow
the ice cream machine compressor to cool
completely before disassembling and
cleaning.
CLEANING THE STAINLESS
STEEL HOUSING
1. Wipe the exterior of the stainless steel
housing and the LCD screen with a soft
damp cloth. Do not use a dry paper towel
or cloth to clean the LCD screen, or use an
abrasive cleanser or metal scouring pad to
clean any part of the ice cream machine as
these will scratch the surface.
NOTE
Never immerse the stainless steel housing in
water or place in the dishwasher. Take care not
to allow water or cleaning fluids to seep under
the buttons or LCD screen on the control panel.
NOTE
To clean the ice cream chamber ensure that
the unit is at room temperature. Wipe out with
soapy water and a soft damp cloth.
2. If over-spill of cream, milk, chocolate etc.
occurs in the interior chamber, carefully
remove using a soft, damp cloth.
3. Let all surfaces dry thoroughly prior
to inserting the power plug into
a power outlet.
18
CLEANING THE LID.
The lid can be cleaned in warm soapy water,
using a soft sponge. Do not use an abrasive
cleanser or metal scouring pad as these
will scratch the surface. Let all surfaces dry
thoroughly prior to placing into the ice
cream machine.
CLEANING THE ICE CREAM BOWL
Fill the ice cream bowl up halfway with warm
soapy water. A non-abrasive liquid cleanser
or mild spray solution may be used. Allow to
stand for 10-20 minutes.
NOTE
Ice Cream Bowl is NOT dishwasher safe.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

The smart scoopBci600

Table of Contents