No Set Gmrp Interfacemode; Set Gmrp Interfacemode All; No Set Gmrp Interfacemode All; Set Gvrp Adminmode - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no set gmrp interfacemode

This command disables GARP Multicast Registration Protocol on a selected interface. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Format
Mode

set gmrp interfacemode all

This command enables GARP Multicast Registration Protocol on all interfaces. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default
Format
Mode

no set gmrp interfacemode all

This command disables GARP Multicast Registration Protocol on a selected interface.
Format
Mode

set gvrp adminmode

This command enables GVRP.
Default
Format
Mode
Switching Commands
no set gmrp interfacemode
Interface Config
Disabled
set gmrp interfacemode all
Global Config
no set gmrp interfacemode all
Global Config
Disabled
set gvrp adminmode
Privileged EXEC
202-10009-01_060204
8-47