No Snmp-Server Enable Traps; Snmp-Server Enable Traps Bcaststorm; No Snmp-Server Enable Traps Bcaststorm; Snmp-Server Enable Traps Linkmode - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no snmp-server enable traps

This command disables the Authentication Flag.
Format
Mode

snmp-server enable traps bcaststorm

This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Format
Mode

no snmp-server enable traps bcaststorm

This command disables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
Mode

snmp-server enable traps linkmode

This command enables Link Up/Down traps for the entire switch. When enabled, link traps are
sent only if the Link Trap flag setting associated with the port is enabled (see 'snmp trap link-
status' command).
Default
Format
Mode

no snmp-server enable traps linkmode

This command disables Link Up/Down traps for the entire switch.
Format
Mode
8-30
no snmp-server enable traps
Global Config
Enabled
snmp-server enable traps bcaststorm
Global Config
no snmp-server enable traps bcaststorm
Global Config
Enabled
snmp-server enable traps linkmode
Global Config
no snmp-server enable traps linkmode
Global Config
202-10009-01_060204
Switching Commands