NETGEAR ProSafe GSM7224 User Manual page 62

Layer 2 managed switch software
Hide thumbs Also See for ProSafe GSM7224:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Dot1x Statistics
Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and sec-
The display parameters when the argument is 'switchport' is as follows:
8-10
GMRP PDU's Transmitted - The count of GMRP PDU's trans-
mitted from the GARP layer.
GMRP Failed Registrations - The number of times attempted
GMRP registrations could not be completed.
STP BPDUs Transmitted - Spanning Tree Protocol Bridge Pro-
tocol Data Units sent
STP BPDUs Received - Spanning Tree Protocol Bridge Protocol
Data Units received
RST BPDUs Transmitted - Rapid Spanning Tree Protocol
Bridge Protocol Data Units sent
RSTP BPDUs Received - Rapid Spanning Tree Protocol Bridge
Protocol Data Units received
MSTP BPDUs Transmitted - Multiple Spanning Tree Protocol
Bridge Protocol Data Units sent
MSTP BPDUs Received - Multiple Spanning Tree Protocol
Bridge Protocol Data Units received
EAPOL Frames Received - The number of valid EAPOL
frames of any type that have been received by this authenticator.
EAPOL Frames Transmitted - The number of EAPOL frames
of any type that have been transmitted by this authenticator.
onds since the statistics for this port were last cleared.
Octets Received - The total number of octets of data received by
the processor (excluding framing bits but including FCS octets).
Total Packets Received Without Error- The total number of
packets (including broadcast packets and multicast packets)
received by the processor.
Unicast Packets Received - The number of subnetwork-unicast
packets delivered to a higher-layer protocol.
Multicast Packets Received - The total number of packets
received that were directed to a multicast address. Note that this
number does not include packets directed to the broadcast
address.
202-10009-01_060204
Switching Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents