No Snmp-Server Community Mode; Snmp-Server Community Ro; Snmp-Server Community Rw; Snmp-Server Enable Traps - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Default
Format
Mode

no snmp-server community mode

This command deactivates an SNMP community. If the community is disabled, no SNMP requests
using this community are accepted. In this case the SNMP manager associated with this
community cannot manage the switch until the Status is changed back to Enable.
Format
Mode

snmp-server community ro

This command restricts access to switch information. The access mode is read-only (also called
public).
Format
Mode

snmp-server community rw

This command restricts access to switch information. The access mode is read/write (also called
private).
Format
Mode

snmp-server enable traps

This command enables the Authentication Flag.
Default
Format
Mode
Switching Commands
The default private and public communities are enabled by
default. The four undefined communities are disabled by default.
snmp-server community mode <name>
Global Config
no snmp-server community mode <name>
Global Config
snmp-server community ro <name>
Global Config
snmp-server community rw <name>
Global Config
Enabled
snmp-server enable traps
Global Config
202-10009-01_060204
8-29