Numeric; Show Running-Config; Show Sysinfo; Snmp-Server - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Note: Message log information is not retained across a switch reset.

show running-config

This command is used to display the current setting of different protocol packages supported on
switch. This command displays only those parameters, the values of which differ from default
value. The output is displayed in the script format, which can be used to configure another switch
with same configuration.
Format
Mode

show sysinfo

This command displays switch information.
Format
Mode
Switch Description
System Name
System Location
System Contact
System ObjectID
System Up Time
MIBs Supported

snmp-server

This command sets the name and the physical location of the switch, and the organization
responsible for the network.The range for name, location and contact is from 1 to 31 alphanumeric
characters.
Default
Format
8-14
show running-config
Privileged EXEC
show sysinfo
Privileged EXEC
Text used to identify this switch.
Name used to identify the switch.
Text used to identify the location of the switch. May be up to 31
alpha-numeric characters. The factory default is blank.
Text used to identify a contact person for this switch. May be up
to 31 alpha-numeric characters. The factory default is blank.
The base object ID for the switch's enterprise MIB.
The time in days, hours and minutes since the last switch reboot.
A list of MIBs supported by this agent.
None
snmp-server {sysname <name> | location <loc> | contact
<con>}
202-10009-01_060204
Switching Commands