Chapter 3 - System Settings; Open The System Settings Menu; The System Settings - Honeywell WEB-HMI Series User Manual

CHAPTER
3
SYSTEM SETTINGS

Open the System settings menu

The system settings menu displays after powering on the device and entering valid
credentials "Username" and "Password" into the login page.

The system settings

The main topics of configuration are listed on the left side of the system settings
screen.
WEBs HMI Touchscreen Monitor - User Guide
WEB BROWSER
Localisation Setup the language of the device
System System information, Status and Timers
Logs Configure log file generation
Date & Time Configure the date and time of the device
Network Configure the network settings of the Ethernet interfaces
Services Use to enable the network bridge
Management Firmware updates and basic FW and booter configurations
Display Display setup like colors, timeouts and touch-screen
calibration and more
Fonts Use to install additional fonts.
Authentication Change passwords or create SSL certificates
Restart Restart the main or config OS
Web Browser Configure the web browser properties like home page
EXIT Close the system settings view
7