Chapter 4 - Factory Reset; Factory Reset; Reset Procedure; Create The Recovery Usb Device - Honeywell WEB-HMI Series User Manual

CHAPTER
4

FACTORY RESET

Factory reset
Device restore deletes all configuration items and all customer data on the device,
except installed firmware and application updates.

Reset Procedure

Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.

Create the recovery USB device

Format the device with a FAT32 filesystem and copy the complete file "un6x-chro-
mium-xx-x.x.zip" onto the USB Flash Drive.
WEBs HMI Touchscreen Monitor - User Guide
Power cycle the device
Keep tapping the touch screen until "TAP-TAP DETECTED" appears on
the top of the screen.
Remove the finger from the touch screen. The ">>" is pointing to "SYSTEM
SETTINGS".
Wait 5 seconds until "** ENTERING SYSTEM SETTINGS **
Touch and hold the screen. The ">>" is pointing to "DEVICE RESTORE".
Hold the touch screen until the device starts resetting.
15