Configuration Of The Web Client - Honeywell WEB-HMI Series User Manual

Confirm the new password in the Confirm Password box. Select Change Password.
The 'admin' password will be changed and the device will now reboot.
The new password will be required to change the configuration of the device.
Note: Keep your password strong by following these mandatory rules: Use eight or more
characters, mix uppercase and lowercase letters with numbers and special
characters.
Warning: DO NOT FORGET THE NEW PASSWORD. A forgotten password cannot
Wait for the device to reboot and display the Login screen again. Enter 'admin' in
the Username box.

Configuration of the web client

The Settings Page
The settings page is the default start page.
Enter the credentials to open the configuration menu or press Load Homepage on
the top right of screen to access the configuration done in the web browser setup.
If you download a new application, you can force the panel to clear the cache.
3
be cleared or reset. If you loose the admin password of the device,
please contact your local support agents to reset the password.
WEBs HMI Touchscreen Monitor - User Guide