Authentication
Enter in edit mode to change the authentication passwords.
Restart
Enables HMI device to be restarted in either of the following modes:
•
•
Web Browser
This option enables user to configure the behaviour and display options for the
HMI device.
Note: This menu option is not accessible when viewing System Settings via the 'tap-tap'
method.
Parameter
On Startup
Homepage
Fallback page
Enable toolbar
Allow downloading
files
Options press-and-
hold time (s)
WEBs HMI Touchscreen Monitor - User Guide
Config OS: Select to restart the HMI device in special configuration mode. Do
not use this mode unless requested by Technical Support team.
Main OS: Select to restart the HMI device as it would normally behave on power
up.
Description
Defines the behaviour of the HMI panel on power up or following a
restart. This can be set one of the following:
- Open settings page: The login page is displayed. After a successful
login the System Settings screen is displayed.
- Continue where you left: Option not supported.
- Open homepage: The specified Homepage is displayed. The HMI
panel login page does not appear.
The primary web page to be displayed when On Startup - Open
Homepage is selected, or when Load Homepage is selected from
the login screen. For example: https://192.168.0.85
If enabled, this allows a secondary webpage to be specified which
will be displayed if the Homepage is unavailable.
If enabled, this displays a toolbar along the top edge of the display,
providing access to the login screen or allowing a different web page
to be entered. The following options are also available when the
toolbar is enabled:
- Show toolbar only on error: If enabled, the toolbar will only be
displayed if there is a problem displaying the specified Homepage
or Fallback page.
- Show history buttons: Not supported.
- Show loading controls: Not supported.
Not supported.
Sets how long you need to touch and hold the top left corner of the
screen to access the System Settings from the Web Browser.
13