Honeywell WEB-HMI Series User Manual page 9

Change the "on start" behavior of the device
Item
On Startup
Homepage
Configure the Network interface
By default, all network interfaces are configured for DHCP. The ETH0 (For capaci-
tive touchscreens, beside the power connector) is configured as WAN port.
•
•
To configure the network interface, open the "Network" tab and press the EDIT
button on the top right.
5
Default
Open settings page
Continue where you left
Open homepage
https://google.com
If you connect the panel to the network using ETH0 and a DHCP server is
running the IP address is automatically requested from the DHCP server.
If no DHCP server is available or can't be used on site, the configuration can be
changed to static IP.
Description
After a restart of the device the setting page displays
Jump to the application where you left
Open the configured Homepage
Enter the start page which you want to load as homepage
including http:// or https://
WEBs HMI Touchscreen Monitor - User Guide