Honeywell WEB-HMI Series User Manual page 21

3. Authentication with admin user.
4. Open tab "Management".
5. Click the "Update" button in the section "Bootloader", "Config OS" and/or "Main
6. Insert the USB stick. Until the product beeps. Then press the "Browse Image"
7. Browse to "usbmemory" and select the image to install.
8. Press "Proceed" to install the update.
Updating the Chromium Application
1. Put the new application files into the root directory of a FAT formatted USB
2. Boot into System Settings
17
iii.Touch and hold the screen. The ">>" is pointing to "RESTART: ConfigOS".
iv.Do not lift the finger until the panel starts rebooting to ConfigOS.
OS" to start the update process of the corresponding part.
button.
Stick.
a. Power cycle the device.
b. Keep tapping the touch screen until "TAP-TAP DETECTED" appears on the
top of the screen.
c. Wait until the product boots into "System Settings".
WEBs HMI Touchscreen Monitor - User Guide