Management; Display; Fonts - Honeywell WEB-HMI Series User Manual

Management

From the management area, it is possible to Update System Components of the
WEB-HMI device.
Caution: Working in the Management area is a critical operation and, when not

Display

This option enables user to set various characteristics of the display to be changed:
Parameter
Brightness
Back light
timeout
Orientation
Note: Changing the orientation will ask you to confirm the new setting and will require the
HMI panel to reboot before the new orientation to take effect.

Fonts

Lists the fonts installed on the HMI panel and allows other fonts to be installed.
•
•
Install additional fonts
Step 1.
WEBs HMI Touchscreen Monitor - User Guide
performed correctly, may damage product, requiring service of the product.
Contact technical support for assistance.
Use the "Clear" command inside the "Data" section to remove HMI Runtime
from the device (Factory Restore).
Description
Adjust the backlight level between '0' (minimum) and '10' (maximum)
by touching a position along the Brightness bar or by using the + or -
buttons.
Adjust the backlight timeout period between 'always on' and '60
minutes' (in 1 minute intervals) by touching a position along the
Backlight timeout bar or by using the + or - buttons.
If required, select a different Orientation from the displayed options.
Standard Fonts: This area lists all fonts that are included as standard - these
cannot be removed.
Custom Fonts: Shows any user-installed fonts. You can install/remove new
fonts from here.
Select (+ sign) to add a new font. The following dialogue box is
displayed:
11