About The System; Compatibility; System Information - Honeywell Galaxy TouchCenter Plus Installer Manual

This guide provides information on how to install and configure Honeywell's Galaxy TouchCenter Plus graphical
touch-screen keypads, which are Advanced User Interface (AUI) devices. Your system will comprise one of the
following keypads and the wall mount plastics:

CP045-00 Galaxy TouchCenter Plus flush mount

CP046-00 Galaxy TouchCenter Plus flush mount, with Prox

A045

Compatibility

The listing below identifies the alarm systems that the keypad can interface with, the maximum number of keypads that
can be used with each system, and the minimum alarm panel software revision level for compatibility.
Alarm system
Flex/Flex+ 20
Flex/Flex+ 50
Flex/Flex+ 100
Dimension 48
Dimension 96
Dimension 264
Dimension 520
Note: Only one Galaxy TouchCenter Plus keypad is permitted per RS485 line.

System Information

To view the current software/firmware version installed on your system, do the following:
ICON
1. On the
Home
then enter an authorised code.
2. Press the

About the System

Wall mount plastics for Galaxy TouchCenter Plus
Maximum number
ACTION
screen, press the
Setup
icon
System Info
Minimum panel
of keypads software version
1
1
1
1
2
2
4
The MAC Address, CRC, software version and
icon, and
MCU firmware are also displayed.
5
3.xx
3.xx
3.xx
6.xx
6.xx
6.xx
6.xx
NOTES