P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
Section 3-8
Connectivity Setup
NOTE:
If connected to a stand-alone network (Peer-to-Peer network with a Venue Fit™ scanner, and an
optional network printer), you should use default delivery settings.
3-8-1
Introduction
To be able to use the network functions when connected to a hospital network, the Venue Fit™ must
have a proper network address.
•
Before you can set up the Venue Fit™ , you need to collect some information.
•
The Worksheet (see sample
information.
•
Typical source for this information is the network administrator.
Connectivity Installation Worksheet
Chapter 3 - System Setup
VENUE FIT™ SERVICE MANUAL
) can be used for gathering this
3-35