Hitachi LAB-X5000 User Manual page 4

Introduction
Introduction
The LAB-X5000 is a benchtop elemental analysis instrument based on
non-destructive energy dispersive X-ray fluorescence technology.
It is designed to measure a range of materials including solids,
powders, gels and liquids in seconds or minutes. The LAB-X5000 is
available in several hardware configurations that are optimized for
specific applications. In order to get the best performance it is
necessary to create an empirical calibration curve derived from
standards with known values.
Please note that this manual provides general instructions on typical
use of the instrument. Operators should be properly trained in the
use of the instrument. Please consult with your local Hitachi
High-Tech Analytical Science representative to arrange for necessary
training.
The contents of this manual are subject to change without notice.
Hitachi High-Tech Analytical Science is not responsible for damage
that may result from the use of misue of this document.
▶
Hitachi High-Tech Analytical Science I