Table of Contents
Advertisement
LAB-X5000 Series User Guide
visible damage. Remove the small boxes/polyethylene bags containing accessories
and spares.
2.1.2.
Place the instrument on a flat-topped work surface, away from direct sunlight, where
changes in ambient temperature are minimal.
2.1.3.
Insert the power cord into the receptacle on the left underside of the instrument; insert
the other end into an appropriately-grounded wall outlet. Mains cable must be applied
in such a way which allows easy disconnection of the wall plug. If original mains cable
needs replacement, it must be replaced only with cable which has same electric
ratings. See Section 2.3.2 for details of power requirements.
2.2. Equipment Supplied
2.2.1.
Each
LAB-X5000
(PartNo.LX5K-PACK1) which comprises the following items:
Part No
54-CP1057
SUGL50B
54-QX1008
54-LX6879-2
51-3963527
54-LX320
54-QX1009
54-LB3181
XRFMS005
2.3. Mains Power Connections
2.3.1.
This instrument must be connected to a grounded mains supply. If you are in any
doubt about your power supply, consult a qualified electrician before proceeding.
2.3.2.
The LAB-X5000 is operated from a single-phase supply in the range of 100-240 V and
47 - 63 Hz.
2.3.3.
The instrument can be switched on at the power switch, with is situated on the lower
left side of the instrument.
2.4. Printer
2.4.1.
Printer paper will be in the box containing the instrument's accessories.
2.4.2.
Lift the printer cover on the left front of the instrument using the tab on the top.
2.4.3.
Place the roll of paper inside with the paper unrolling from underneath the roll, as you
pull it.
2.4.4.
Press firmly on the front corners of the printer cover until it snaps closed.
2.4.5.
A small blue light flashes when the printer cover is not fully closed. It will remain
solid blue when the cover is closed properly.
2.5. External Configuration
comes
complete
with
Description
Roll of printer paper
SUS for diagnostics
SUS box
Secondary safety windows
USB with user manual and
factory database backup
Safety window assembly tool
Silica gel desiccant 601-057
SUS transit warning label
XRF SUS instructions
a
comprehensive
accessories
Quantity
5
1
1
3
1
1
1
1
1
kit
- Quick Links:
- Analyze a Sample
Hide quick links:
Advertisement
Table of Contents
