Quick Access Buttons; Wi-Fi Setup - Hitachi LAB-X5000 User Manual

LAB-X5000 Series User Guide
Unavailable options may be visible, but greyed out, and tapping them will have no
effect. Some options will not be visible when logged in as an Operator.

4.2. Quick Access Buttons

4.2.1. The Quick Access Buttons are on the left-hand side of the pulldown menu. They are
shortcuts to frequently used options within the software.
Wi-Fi button is used to toggle Wi-Fi on/off. When turned on, it opens Wi-Fi
settings, where a network can be selected.
Std Dev toggles whether the standard deviation is visible on the results screen.
Sample Naming is used to name a sample prior to measurement.
Pass/Fail is used to toggle between measurement pass/fail information on the
results screen.
Auto Printing is used to select if sample measurement results will automatically
print from the on-board printer. Note that it is possible to print results from
any previous result.
Font Size is used to toggle between results displays. When in LARGE, only the
first three rows of results will display on the screen. When in NORMAL, six
rows of results including precision or pass/fail results will display.
Logout is used to exit the analysis software. Tap to begin the exit sequence.
The instrument does not turn off after tapping this button.

4.3. Wi-Fi setup