Connecting To The Auxiliary Port - Cisco Router 3600 Hardware Installation Manual

Connecting to a Console Terminal or Modem
Figure 3-60 Connecting a Console Terminal to a Cisco 3660 Router

Connecting to the Auxiliary Port

To connect a modem to the auxiliary port on the router, perform the following procedure:
Step 1 Use the black RJ-45-to-DB-25 modem adapter cable to connect the router to a modem. (See
through
For information about auxiliary port pinouts, refer to the
Specifications
Note On the Cisco routers, the auxiliary port is color-coded black.
Make sure that your modem and the router auxiliary port are configured for the same transmission speed
Step 2
(up to 115200 bps is supported) and hardware flow control with data carrier detect (DCD) and data
terminal ready (DTR) operations.
Cisco 3600 Series Routers Hardware Installation Guide
3-46
VOICE
2V
VIC
FXS
V1
1
SEE MANUAL BEFORE INSTALLAT
0
ION
SERIAL
4T
SERIA L 3
SERIA L 2
SERIA L 1
SERIA L 0
CN/LP RXC RXD
TXC TXD
CN/LP RXC RXD
TXC TXD
CN/LP RXC RXD
TXC TXD
CN/LP RXC RXD
TXC
RJ-45-to-RJ-45 Console port
rollover cable connector (RJ-45)
Figure 3-64.)
document available online and on the Documentation CD-ROM.
HIGH SPEED SERIAL
1HSSI
V0
H
EN
ETHERNE T
4E
ETH 3
ETH 2
ETH 1
ETH 0
3 2 1
0
LINK
EN
ACT
TXD
RJ-45-to-DB-9 or
RJ-45-to-DB-25 adapter
Cisco Modular Access Router Cable
Chapter 3 Installing the Router
Laptop computer
Figure 3-61
OL-2056-05