Cisco Router 3600 Hardware Installation Manual page 105

Cisco systems router hardware installation guide
Hide thumbs Also See for Router Cisco 3600:
Table of Contents

Advertisement

Chapter 3
Installing the Router
Enter an enable password that is different from the enable secret password. This password is not
Step 5
encrypted (less secure) and can be seen when viewing the configuration:
Step 6
Enter the virtual terminal password, which prevents unauthenticated access to the router through ports
other than the console port:
Step 7
Respond to the following prompts as appropriate for your network:
A summary of the available interfaces is displayed:
Step 8
Note
Select one of the available interfaces for connecting the router to the management network:
Step 9
Step 10
Respond to the following prompts as appropriate for your network:
Step 11
The configuration is displayed:
OL-2056-05
The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password: xxxxxx
The virtual terminal password is used to protect
access to the router over a network interface.
Enter virtual terminal password: xxxxxx
Configure SNMP Network Management? [yes]:
Community string [public]:
The interface numbering that appears is dependent on the type of Cisco modular router platform
and on the installed interface modules and cards.
Current interface summary
Controller Timeslots D-Channel Configurable modes Status
T1 0/0
24
23
Interface
FastEthernet0/0
FastEthernet0/1
Enter interface name used to connect to the
management network from the above interface summary: fastethernet0/0
Configuring interface FastEthernet0/0:
Use the 100 Base-TX (RJ-45) connector? [yes]: yes
Operate in full-duplex mode? [no]: no
Configure IP on this interface? [yes]: yes
IP address for this interface: 172.1.2.3
Subnet mask for this interface [255.255.0.0] : 255.255.0.0
Class B network is 172.1.0.0, 16 subnet bits; mask is /16
The following configuration command script was created:
hostname fig
enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1
enable password xxxxxx
line vty 0 4
password xxxxxx
snmp-server community public
!
no ip routing
pri/channelized
IP-Address
OK? Method Status
unassigned
NO
unset
unassigned
NO
unset
Cisco 3600 Series Routers Hardware Installation Guide
Configuring the Router
Administratively up
up
up
Prol
up
dow
3-55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3661366236203640a36603640

Table of Contents