Cisco 3660 Chassis Ground Connection - Cisco Router 3600 Hardware Installation Manual

Chapter 3 Installing the Router

Cisco 3660 Chassis Ground Connection

To connect a Cisco 3660 chassis to ground, perform this procedure:
Strip one end of the ground wire to the length required for the ground lug or terminal.
Step 1
Crimp the ground wire to the ground lug or ring terminal, using a crimp tool of the appropriate size.
Step 2
Step 3 Attach the ground lug or ring terminal to the chassis as shown in
ground lug, use the two screws with captive locking washers provided. For a ring terminal, use one of
the screws provided. Use a number 2 Phillips screwdriver, and tighten the screws to a torque of 8 to 10
in-lb (0.9 to 1.1 N-m).
Connect the other end of the ground wire to a suitable grounding point at your site.
Step 4
Figure 3-41 NEBS-Compliant Ground Lug Attachment on a Cisco 3660 Router
OL-2056-05
For the NEBS ground lug—approximately 0.75 in. (20 mm)
–
For user-provided ring terminal—as required
–
VOICE
2V
VIC
FXS
V1
1
SEE MANUAL BEFORE INSTALLA
SERIAL
4T
SERIA L 3
SERIA L 2
SERIA L 1
CN/LP RXC
RXD TXC
TXD CN/LP RXC
RXD TXC
TXD
CN/LP RXC RXD TXC
TXD
CN/LP RXC
HIGH SPEED SERIAL
1HSSI
0
TION V0
EN
ETHERNE T
4E
SERIA L 0
ETH 3
ETH 2 ETH 1
ETH 0
3 2
1 0
LINK
EN
ACT
RXD TXC
TXD
Ground lug
Cisco 3600 Series Routers Hardware Installation Guide
Installing Chassis Ground Connection
Figure 3-41 or Figure
H
3-42. For the
3-25