Installing the Router
This chapter describes how to install your Cisco 3600 series router and connect it to networks and
external devices. It contains the following sections:
•
Installing Modules, Interface Cards, and Power Supplies, page 3-2
Installing the Chassis, page 3-3
•
Installing Chassis Ground Connection, page 3-19
•
Power Connections, page 3-27
•
•
Connecting WAN, LAN, and Voice Cables, page 3-37
Connecting to a Console Terminal or Modem, page 3-43
•
Powering Up the Router, page 3-51
•
Configuring the Router, page 3-53
•
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
See the
Note
and equipment that might be required for your installation.
OL-2056-05
"Tools and Equipment for Installation and Maintenance" section on page 2-8
C H A P T E R
Cisco 3600 Series Routers Hardware Installation Guide
3
for a list of tools
3-1