Auxiliary Modem Connection - Cisco 10008 Quick Start Manual

Auxiliary Modem Connection

This asynchronous EIA/TIA-232 serial port is used to connect a modem to the PRE for remote administrative access. Use the
following procedure to connect the Cisco 10008 router to a modem.
Figure 27 Connecting the Modem Cable to the Auxiliary Port
Connect one end of the modem cable to the RJ-45 port on the primary PRE, labeled AUX.
Step 1
Step 2 Run the cable up and through the cable-management bracket and connect the other end of the cable to your modem.
Installing Network Cables to the Line Cards
See the Cisco 10000 Series Routers Line Card Hardware Installation
cards and the Carrier, optical devices, cables, and specifications for line cards. Install all optical devices and attach all network
cables to the line cards before you power on the system.
34
C IS C O
1 0 0 0 0
Guide for instructions and information on installing line