Installing The Router - Cisco 10008 Quick Start Manual

3

Installing the Router

The Cisco 10008 router can be rack-mounted in a 19-inch rack with either a flush-mount or center-mount configuration, or in
a 23-inch rack in a center-mount configuration. Use
If you choose to install the Cisco 10008 router on a workbench or tabletop:
Ensure that you have a minimum of 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (at both the front
Step 1
and top/rear sides of the chassis) and a minimum of 19 inches (48.3 cm) of clearance at the front and rear of the chassis
for cables and maintenance.
Follow the lifting instructions provided for lifting the chassis in the "Lifting the Chassis" section on page 9.
Step 2
Attach the cable-management bracket. See
Step 3
8
the rack-mounting kit provided with your system.
Figure 8 on page 16.