Cisco 10008 Quick Start Manual page 28

Figure 21 Alarm Indicator Terminal Block Connections
Step 4 Connect one set of alarm indicator wires to the alarm terminal block as follows:
a. Connect one lead to the common (COM) terminal.
b. Connect the other lead to the normally closed (NC) or normally open (NO) terminal.
Figure 21 shows the wiring configuration for normally open (NO) alarm relays. If you are wiring the router in series
Caution
with other equipment for the alarm indicators, use the normally closed (NC) terminals. If you are wiring the router
in parallel with other equipment for the alarm indicators, use the NO terminals.
Repeat Step 3 and Step 4 for any remaining alarm indicators.
Step 5
28
ALARMS
50VA
SELV max
NC
MINOR
COM
NO
NC
COM
MAJOR
NO
NC
COM CRITICAL
NO