Step 12: Create A Scheduled Backup For A Share - Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual

Chapter
3
Getting Sarted Guide
5. In the Reserve Size field, enter the amount of space that you want to allocate to the snapshot,
and then select the unit from the drop-down menu. This space becomes unavailable for any
other storage on the array. Note that you must enter a minimum of 32 MB in this field.
6. Click Add to save the snapshot. Clicking Add saves the first snapshot. Each subsequent snapshot
occurs based on the defined schedule.
The snapshot details appear in the Currently Active Snapshots area at the top of the page.

Step 12: Create a Scheduled Backup for a Share

You can quickly configure a backup to run at a scheduled time interval for a share or group of shares.
The backup can be saved to a remote CIFS server or to another share on the NSS.
To set up a scheduled backup:
1. From the Manager Menu, click Shares
2. Click Schedule Backup.
40
NOTE: The snapshot is built at the array level. The
Volume column currently shows the amount of space left
on the array on which the volume is located. To calculate
the reserve size, refer to the applicable volume size as
listed on the Volume page.
Backup.
Chapter 3: Configuring the Network Storage System (NSS)
Step 12: Create a Scheduled Backup for a Share