Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual page 46

Chapter
3
Getting Sarted Guide
6. If you saved the file to the USB flash device, display the Storage Status page.
7. Click Unmount.
8. When the AUX-1 LED on the front of the chassis is off, you can safely remove the unmounted
USB flash device from the AUX-1 port.
44
NOTE: Removing the USB flash device in a mounted state
means that you risk causing file or filesystem corruption.
Chapter 3: Configuring the Network Storage System (NSS)
Step 14: Save the Current Configuration