Step 13: Complete The Configuration - Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual

Chapter
3
Getting Sarted Guide
The Select Backup Schedule page appears.
7. Select the backup frequency as one of the following:
• Daily: Select each day on which you want the backup to occur.
• Weekly: Select the day of the week on which you want the backup to occur.
• Monthly: Select the day of the month on which you want the backup to occur. Make sure you
select a day that is 28 or less. If you select the 29th, 30th or 31st day, the backup does not
run during months that do not contain that day.
8. In the Run Backup at field, set up the specific time (hour:minute) at which time the backup
occurs. When setting the hour, use the 24-hour clock.
9. To set up a backup that backs up just the changes made to the share since the last backup, click
Incremental Backups. Leave it unchecked to take a full backup of the share each time the
backup is run.
10. Click OK.

Step 13: Complete the Configuration

There are a number of configuration options not listed in this guide (for example, you can set up
Email Alerts, SNMP alerts, VLANs, and so on). You can find the full details in the Administrator
Guide which you can access either through the Online Help. The Online Help is part of the
Configuration Manager or you can download the pdf version of the Administrator Guide from the
Linksys website (www.linksys.com).
42
Chapter 3: Configuring the Network Storage System (NSS)
Step 13: Complete the Configuration