Creating A Group - Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual

7. To record the user's email address, enter it in the Email Address field. This field is optional.
8. Click OK to create the user and exit the New User page. Click Apply to create the user and then
add another new user.

Creating a Group

Groups let you specify the share access privileges for a set of users. After you create a group, you
can define the group's access privileges on a per-share basis. You can add or remove users to and
from the group at any time. Note that users are assigned a primary group within their user profile.
When users create a file, the group ownership is automatically set to their primary group. The storage
usage is charged to their primary group for the purposes of volume quota accounting. Group
membership, other than the primary group, is defined in either the Add Group or Edit Group page
and is used only to control access to shares and files.
NOTE: You cannot grant security privileges to a group for
a CIFS share through ACL.
To create a group:
1. From the Manager Menu, click Access
The Configured Groups page appears.
2. Click Add.
Chapter 3: Configuring the Network Storage System
(NSS)
Groups.
Chapter
Getting Started Guide
31
3