Step 5: Create A Volume - Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual

3. From the RAID Level drop-down menu, click the RAID level of the RAID array you want to create.
4. Click Add.
The RAID creation can take some time to complete (depending on the size of the disks and the
selected RAID level). You can monitor the progress of the RAID build from the Storage Status
page. When the build is finished, the array appears in the RAID Arrays table. The disks used in
the array are no longer available for creating additional arrays.

Step 5: Create a Volume

After you define at least one RAID array, you can create a volume. You need to create at least one
volume before you can create users, groups, or shares.
To create a volume:
1. From the Manager Menu, click Storage
The Storage Volumes page appears.
2. From the New Volume area, set up the following fields:
• Array: Click the drop-down menu to select the array on which you want to create the volume.
• Name: Enter the name you want to give the volume. The volume name must consist of at least
one alphanumeric character, must begin with a letter, but cannot contain any spaces.
Chapter 3: Configuring the Network Storage System
(NSS)
Volumes.
Chapter
Getting Started Guide
21
3